This low cost clamp on ultrasonic flowmeter is ideal for long-term deployment for flow measurement and closed-pipe applications, such as liquid process control, water flow measurement (hot/chill water, city water, sea water), sewage and sludge measurement, and measurements of oil (crude/diesel/fuel), chemicals (alcohol, acids, etc.), beverage, and many other liquids. Once the sensors are clamped on the pipe using the supplied stainless steel straps it can be programmed in a matter of minutes via RS485. In addition to the 4-20mA and pulse outputs for flow rate and totalizer there are multiple options for integration via cellular telemetry with our M2M Data frontend.
OMNI-TUF-200M DIN-Mount Ultrasonic Flowmeter supplied with transducers for pipe sizes 15-100mm or 100 - 700mm, complete with manual and stainless steel straps.
Features:
High accuracy. Normally, ±1%. When on-site calibration available, ±0.5%.
Wide flow range 0.03 to 105ft/s.
Wide pipe size range (from 1" to 240").
Noninvasive. No pipe disturbance. No moving parts, no pressure drop.
Easy and economical installation. No cutting pipe, non drilling hole.
Suitable for all commonly used pipe materials
Easy to use and set up. Self-explanatory menu programming
Velocity, volumetric and totalized flow
GPRS / GSM networking capability with certain model
Ideal for both clean and opaque liquid flow measurements
Specification
Linearity
0.5%
Repeatability
0.2%
Accuracy
Normally better than ±1%. Could be ±0.5% with on-site calibration.
Response Time
0.5 Seconds
Units
English (U.S.) or metric
Signal Outputs
Current output:1x 4-20mA flow rate
OCT output: 2x flow totals and/or alarms
1x MODBUS RS485
Data Logger
Automatically record the following information: 1) The totalizer data 2) The power time and corresponding flow rate 3) Allow manual or automatic flow loss compensation 4) The instrument working status
32,00 reading capacity
Computer Interface
RS485
Liquids
Type: Virtually all commonly used liquids (full pipe) Temperature: 32˚F - 212˚F (0˚C - 100˚C) Concentration: <10,000ppm and small air bubble concentration
Pipe
Sizes: 1" - 240" Materials: All metals, most plastics, fiber glass, etc. Pipe Length: Better longer than 15D, where D is pipe diameter. If a pump is near, the straight pipe section following the pumps should be > 30D
Cable
Shielded transducer cable. Standard length 15ft (5m). Can be extended to 1640ft (500m). Contact the manufacturer for longer cable requirement. Cable should not be laid in parallel with high-voltage power lines, neither should it be close to strong interference source such as power transformers.
Power
9 VDC to 36 VDC 10 VAC to 36 VAC
Transducer Specifications
Type S1
Small size transducer (magnetic) For pipe size ½” – 4”
Type M1
Standard medium size transducer (magnetic) For pipe size 2” – 28”
Type L1
Large size transducer (magnetic) For pipe size 11” – 240”
For further information,
technical advice, or a
quotation please call or
email
us. If you are not sure which
product you need one of our
technical sales advisors will be
happy to discuss your
application. We also accept
company purchase orders by fax
or post. Credit card orders can
also be placed over the phone
for any product.
ref
description
downloads
price ($)
Order Item
Meter
OMNI-TUF-200M
Flow meter, pipe sizes 1/2" to 240", bidirectional range from ±0.03 to 105 ft/s, analog, digital, and MODBUS output, built-in LCD display for current readings
Wall mounting waterproof case with clear lid for the TUF-200M
95.00
OMNI-TUF-GSM
Wireless GSM communication module for remote monitoring, including web view, SMS and email alarms. Accepts up to four 200M flowmeters, battery backup for powerloss alert.
